We bought our house in Oct 2010. It was built in 2000. It is a concrete slab, wood frame, and Hardieplank exterior. We had to have a windstorm waiver for insurance because there is not a windstorm certificate on file for the house. The roof was replaced in the summer of 2010 due to damage from Hurricane Ike, so there is a windstorm certificate on the roof. This home was a foreclosure, so we have no history on it. I believe we are in Wind Zone 2. The house is just outside Alvin, Tx.
A couple of weekends ago I started to remove the ceramic tile in a couple of rooms to install laminate floors. During the process of removing the baseboards I found some mold on one wall, and ants in the two exterior walls. I have remediated the issues, and currently have all of the sheet rock removed except for the ceiling. All of the walls have metal straps at the tops and bottoms, and makes me think that it was built with windstorm requirements in mind. I'm curious if anyone here knows anything about windstorm building requirements. I will try to post a picture or two to see if anyone can tell me if this looks like it was built to windstorm specs.
I'm not looking for a definitive answer, just some opinions. I'm going to see if I can get one of the state recognized structural engineers (Texas) to come look at it before I start putting things back together, and see what needs to be done to get windstorm certification.
Source: http://www.houserepairtalk.com/f32/wind-zone-construction-15446/
mercury retrograde bath salts heart shaped box lucid 2012 ncaa tournament bracket matterhorn chris harrison
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.